Four Faith F-NR410 Outdoor 5G Industrial Router
The FNR410-00W6 is a 5G NR IoT wireless communication router that leverages public 4G/5G/5G Redcap networks to provide users with wireless long-distance, large-data transmission capabilities. This product features a high-performance industrial-grade 32-bit communication processor and industrial-grade wireless module, with an embedded real-time operating system as its software support platform. It offers 1 RS232 port, 1 RS485 port, and 3 Gigabit Ethernet ports, enabling simultaneous connections to serial devices, Et
Features
- 5G Industrial Router transmission, Wi-Fi 6, and routing functionality.
- High-performance industrial-grade wireless module
- High-performance industrial-grade 32-bit communication processor
- Metal shell, protection grade IP66. Metal housing and system safety isolation
- Wide power input DC 9~36V
- Waterproof aviation connectors enable simple wiring
- WDT Watchdog design to ensure system stability
- Adopt a complete anti-drop mechanism to ensure that the data terminal is always online
- Built-in 1.5KV electromagnetic isolation protection for Ethernet interface
- RS232/RS485 interface power and data isolation, in line with CSA, UL and IEC standards
- SIM/UIM card interface built-in 15KV ESD protection
- Built-in reverse phase protection and over voltage protection for power interface
- Standard RS232, RS485, Ethernet and WIFI Interface
- Intelligent data terminal, can enter data transmission state after power on
- Convenient system configuration and maintenance interface (WEB/CLI)
- Supports wall-mounted and pole-mounted installation
- Input power failure alarm supported
- Device temperature anomaly alarm supported
- FRP intranet penetration supported
- POE+ power reception supported
- Network port status detection, rate reporting, and latency reporting supported
- 4G/5G and wired WAN dual-link intelligent failover supported
Specifications
Cellular Specification
| Product | 5G 5G Redcap |
| Standard and | LTE: B1/B3/B5/B8 |
| Frequency | B1/B2/B3/B4(66)/B5(18/19/26)/B7/B8/B12(17)/B13 LTE-TDD: /B14/B20/B25/B26/B28/B29/B30/B38/B39/B40/B4 B34/B38/B39/B40/B41 1/B42/B43/ B46/ B48/B71 Note: Band support may vary based on the selected module region. 5G NR: DL 3.4 Gbps; UL 350 Mbps 5G NR: DL 226 Mbps; UL 120 Mbps |
| Theoretical Bandwidth | LTE CAT20: DL 2.0 Gbps; UL 150 Mbps LTE: DL 200 Mbps; UL 100 Mbps HSPA+: DL 42 Mbps; UL 5.76 Mbps |
Hardware System
| Product | 5G 5G Redcap Items Contents |
| CPU | CPU@880MHz, Dual Core |
| Flash | 128MB |
| DDR3 | 512MB WIFI Items Contents |
| Wi-Fi Protocol | IEEE802.11 a/b/g/n/ac/ax (WIFI 6) |
| Frequency Band | 2.4GHz+5.8GHz |
| Theoretical Max | 2.4GHz 2x2MIMO 11ax (WIFI 6), 0.573 Gbps |
| Bandwidth | 5.8GHz 2x2MIMO 11ax (WIFI 6), 1.2 Gbps |
| Frequency Band | 20MHz, 40MHz, 80MHz |
| Mesh Networking | Supports Mesh Networking with Four-Faith CPE/Router devices |
Power Supply
| Power Standard | DC 12V/1.5A |
| Range | DC 9~36V |
| Operate Current | < 1.1A (12V) |
Interfaces
| Aviation Connector | Serial Port: Terminal interface with 1 RS232 (optional RS485) and 1 RS485, equipped with 15KV ESD protection. Power: DC power connector with built-in reverse polarity protection |
| Indicators | PWR, SYS, Online, WiFi 2.4G, WiFi 5.8G, 5G (tri-color LED) |
| SIM Card | 2 x standard pluggable SIM card slots (compatible with eSIM) |
| WIFI Antenna | 2 standard SMA male antenna connectors with 50Ω impedance. 4 standard SMA female antenna connectors with 2 standard SMA female antenna connectors with Cellular Antenna 50Ω impedance 50Ω impedance |
| Reset | Restores configuration to factory settings Physical Characteristic |
| Product | 5G 5G Redcap Items Contents |
| Casing | Metal casing IP66 198x159x43mm |
In the box: 1.F-NR410 host 2.Cellular antenna 3.WIFI antenna 4.RJ45 cable 5.Power adapter
Supplied and supported in the UK by Take 2 Technology. Trade pricing and volume discounts available. Contact us for a datasheet or a tailored quote.