LoRaWAN routers and devices
The lastest LoRaWAN routers and sensors for wireless monitoring and metering from 5G Mobile CCTV. Best seller. Online Now !!
Beyond gateways and sensors, a full LoRaWAN network often needs additional routers, controllers and devices to build out coverage and act on the data. This wider category covers LoRaWAN routers that combine connectivity roles, output controllers that switch relays and equipment, repeaters that extend reach, and specialist end devices that go further than a standard sensor. Together they turn a basic network into a working control system.
Whether you are extending range across a large estate, adding remote switching for pumps and gates, or bridging LoRaWAN to other networks, the right device fills the gap between your gateway and your sensors. 5G Mobile CCTV supplies this broader range of LoRaWAN networking and control hardware so you can design a network that fits the site rather than forcing the site to fit the kit.
How to choose LoRaWAN routers and devices
- Define the job first: a LoRaWAN router adds connectivity or bridging, a controller switches outputs like relays and pumps, and a repeater extends range, so pick by function rather than label.
- For remote control, choose devices with the right outputs and inputs, matching relay ratings and digital or analogue channels to the equipment you intend to switch or read.
- Check integration with your existing network, ensuring any LoRaWAN device speaks to the same network server and frequency band, EU868 in the UK, as the rest of your kit.
- Consider power and mounting, since some routers and controllers need mains while others run on battery or solar, which affects where you can place them on site.
- Plan for expansion, choosing devices that let you add channels, outputs or coverage later, so the network grows with the site instead of needing a rebuild.
Frequently asked questions
What is the difference between a LoRaWAN router and a gateway?
A gateway is the base station that receives sensor data and forwards it to a network server. A LoRaWAN router is a broader connectivity or bridging device that may route, extend or interconnect parts of the network. In short, every network needs a gateway, while routers and other devices add extra roles around it.
What LoRaWAN devices do I need to control equipment remotely?
To switch equipment such as pumps, gates or lighting you need a LoRaWAN output controller with relays, rather than a sensor that only measures. Choose a device whose relay ratings and input channels match your equipment, confirm it works with your network server, and place it within gateway range for reliable remote control.
Can a LoRaWAN device extend the range of my network?
Yes. Repeaters and certain LoRaWAN routers can extend coverage into areas a single gateway cannot reach, such as behind buildings or across a large estate. That said, adding a second well-sited gateway is often the more robust way to grow coverage, so weigh both options against your layout.
Are LoRaWAN routers and devices compatible with my gateway?
Compatibility comes down to two things: the frequency band and the network server. Use EU868 hardware in the UK, and confirm each LoRaWAN device is supported by the same network server, such as The Things Network or a private ChirpStack, that your gateway uses. When both match, devices work together across the network.
What is the difference between a LoRaWAN sensor and a LoRaWAN device?
A sensor is a specific type of device that only measures and reports readings. LoRaWAN device is the broader term, covering sensors plus routers, controllers, repeaters and actuators that also switch outputs, extend range or bridge networks. So every sensor is a device, but many devices do far more than sense.