Bluetooth Vehicle Immobiliser Kit — 4G Tracker, Key Fob & Relay

A complete proximity immobiliser for cars, vans and plant. The vehicle will not start unless the authorised Bluetooth fob is present, and because the controller is a live 4G GPS tracker you keep location, journey history and recovery on the same device.

How the immobiliser works

  1. The VL103D tracker is hardwired into the vehicle and its relay output is wired into the starter or fuel circuit.
  2. The KC208T Bluetooth fob stays with the authorised driver.
  3. When the fob is not detected, the relay opens and the engine will not start.
  4. When the fob comes back into range the circuit is restored and the vehicle starts normally.

What is in the kit

Add any of our 4G dashcams to pair evidence with the immobiliser, and a Tracksolid Pro licence for live tracking.

What this is, and what it is not

This is a proximity immobiliser. It is a strong deterrent against opportunist theft, key relay attacks and unauthorised use, and because the VL103D is a live 4G tracker you also get location and recovery if a vehicle is taken on a trailer.

It is not Thatcham accredited and is not equivalent to a CAN-bus PIN immobiliser such as an Autowatch Ghost. The authorisation token is a physical fob, so a thief who takes the keys and the fob together can defeat it. If your insurer requires a Thatcham TQA-rated device, check with them before ordering.

Specification

Controller Jimi VL103D hardwired 4G tracker
Network 4G LTE with 2G GSM fallback
Positioning GPS + BDS + LBS, accuracy under 10 m
Input voltage 9 to 90V DC, 12V and 24V vehicles
Backup battery 270 mAh 3.7V Li-polymer
Outputs Relay output for starter or fuel cut
Inputs ACC detection, RS485 interface
Ingress rating IP66
Tracker dimensions 90 x 40 x 20 mm, 55 g
Platform Tracksolid Pro, licence sold separately
Installation Professional installation recommended

Supplied from the UK by 5G Mobile CCTV. Fitting a fleet? Request a quote for volume pricing.